Filter
Top Products
21
Tab 6, 14
English Tab 2, 10 Tab 3, 11 Tab 4, 12 Tab 5, 13
Tab 8, 16Tab 7, 15
USING THE HEADSET
If you turn the headset control module off, the control module Bluetooth
wireless technology receiver also turns off, ending the connection to the
Bluetooth technology-enabled phone.
Bluetooth
®
volume control
The Bluetooth volume control increases or decreases the volume of the mobile
phone that is paired to the Bose
®
A20
®
Aviation Headset. The Bluetooth volume
control is located on the right side of the control module. You can only adjust
the Bluetooth technology volume during an active phone call. To change the
volume, press the volume up or volume down button.
Each time you press a Bluetooth volume button, the volume increases or
decreases one level.
Note: Pressing and holding the volume button changes the volume continuously.
Note: When Bluetooth wireless technology is active, you cannot mute the sound
using the Bluetooth volume buttons.
To clear pairing device history from the headset
With Bluetooth technology enabled and on (Bluetooth indicator light flashing)
while not on a call, press and hold both Bluetooth volume up and Bluetooth
volume down buttons at the same time for 8 seconds. After 8 seconds, cycle
the Bluetooth power using the multifunction switch.
volume down
volume up
00_Cavu.book Page 21 Wednesday, April 25, 2012 10:10 AM