Filter
Top Products
Proceed as described above for all of the
CDs/magazines for which the entered name
is to be maintained.
l
After having updated the last maga-
zine, press
d.
To quit the function,
l press DSC.
The system has saved the name informa-
tion for all of the CDs which were inserted.
For all other discs the CD names have been
deleted.
.
.
--+
ANGLE
BRIGHT
SPEECH 2-4:
Different settings for vol-
ume, bass and treble with
the Loudness being
switched off.
Try out which SPEECH set-
ting you like most.
Acknowledgement tone for
all functions which require a
button to be pressed for
more than one second.
The volume can be adjusted
from between 0 to 9. (0
=
off).
Use this setting to alter the
viewing angle to your liking
from -1 to 0 to
+l.
You can adjust the display
brightness from between 1
to 16. You can also select
different values for day and
night.
DSC programming
DSC (Direct Software Control) allows YOU
LOUDNESS Loudness
-
When listenina
to customise certain programmable, basic
settings to suit your personal needs and
preferences and then store them.
The basic settings for this audio equipment
were made at the factory.
In the following you can find an overview of
these settings, so that you can always reset
to these if desired.
at a low level, the Loudness
function creates a more nat-
ural sound by boosting the
low frequency range.
LOUD 1
-
Low boost
LOUD 6
-
Max. boost
I
If you wish to alter any of the programming,
TA VOL
l press DSC.
Used in USA for Emergency
Alert System volume level.
Use the rocker switch and the
@j
button to
select and adjust the functions described in
SPEECH
the following. The display will show you the
adjusted condition.
NV
Select function
cc
>>
Adjust/recall value
CDC NAME
COLOUR
(Variocolour)
green . . . . . . . . . . .
LED ON
LEARN KC
Only available for CD
changer playback (optional).
Use this function to name
your CDs. (See “Entering
CD names”).
Selecting the night bright-
ness:
READ
KL
Switch on the vehicle lights
and program the brightness
value. The car radio’s light-
ing connector must be
hooked up to the vehicle’s
electric system for this to
function properly.
For gradually matching the
radio illumination with the
dashboard lighting.
. . light orange . . . . . . . . . . . . . . . . .
red
Here you can choose
be-
SCANTIME
tween LED ON or LED OFF.
With LED ON, the KeyCard
tongue will flash for extra
anti-theft protection when
the unit has been switched.
S-DX
off and the KeyCard re-
moved.
To “train” a replacement
KeyCard.
Please read the information
in chapter “KeyCard theft
protection system
-
“Replac-
ina” a KevCard”.
In future many RDS radio
stations will differentiate be-
tween music and speech
programs.
You can alter the tone for
speech programs from be-
tween “SPEECH 0 . . . 4”.
SPEECH 0:
Music and speech as per
AUD bass and treble set-
tings.
SPEECH 1:
Linear reproduction (bass,
treble and Loudness set to
“O?
7!?
To read out the KeyCard
data.
The card supplied with the
radio is used to display the
model name, type number
(7
6..)
and the serial
number.
If you remove the KeyCard
during the reading process,
“READ KC” will show on the
display panel. The unit con-
tinues to play but does not
accept any operations ex-
cept from being switched
off. Re-insert the card.
Use this function to set the
scan time for the radio or
CD player from between five
and 30 seconds.
To adjust the seek tuning
sensitivity for distant recep
tion.
DX 1
-
high sensitivity
DX 3
-
low sensitivity
24