Blaupunkt Sydney RCM 126 CD Player User Manual


 
CD changer operation (optional)
This car stereo offers you convenient con-
Selecting CDs and tracks
trol of a Blaupunkt CD changer CDC-A05
or CDC-A071. These changers are sold sep-
arately and can be purchased through your
Blaupunkt dealer.
Switching to CDC operation
Make sure that at least one CD has been
inserted into the magazine.
CD
selection
Press SRC to go through the available au-
dio sources:
>> up
<c
Down
l Press as many times until the display
briefly shows “CDC ON”.
Track selection
A
“CD ERROR”
-
Disc is dirty, damaged,
upside-down or CD-ROM
V
“NO CD”
-
No magazine in changer
or no disc in selected slot.
Upwards: Press briefly.
CUE
-
fast advance (audible): Keep
depressed.
Downwards: Press as many times as
required.
To restart a track: Press briefly.
REVIEW -fast reverse (audible):
Keep depressed.
MIX playback
You can have the CD tracks played in ran-
dom order.
MIX CD
-
The tracks of the selected
CD will be played at random.
The next disc will be selected
in numeric order.
To’&itch
the display mode:
l Press
DIS
during CD playback.
The display mode and the corresponding
I
setting or value will briefly show on the dis-
I
play panel, e.g. “TIME”,
“2
:
32”.
If you have selected “NAME” without hav-
ing specified a name for the corresponding
disc, “CD PLAY” will appear in the display.
Please read also the chapter “Entering CD
names”.
Storing the display mode
You can store your preferred display mode
which will then be active each time the ra-
dio is switched on.
If required,
l press DIS as many times until the de-
sired setting is displayed.
l Hold down the
DIS
button until you
hear a beep.
SCAN operation
Use this function to scan all of the CD tracks.
To start the Scan function:
l Press SC.
The tracks will be scanned one after the oth-
er in ascending order.
To stop the Scan function:
l Press SC briefly.
The track currently being scanned is con-
tinued to be played.
SCAN will also be terminated by
l pressing one of the buttons AUD,
GEO, DSC, SRC,
d,
cc
>> or
A/V.
Entering CD names
You can name up to 99 discs.
The specified name (e.g. VIVALDI) will then
appear in the display.
Be sure to select the display mode “NAME”
using the
DIS
button.
To start the entry:
l Press the DSC button.
“CDC-NAME” will be displayed.
l Press
fl.
The first underscore character will flash.
l Select the first character with the help
_
of the rocker switch
tiv.
You have the choice between the capital
letters A to Z, special characters and the
numbers 0 to 9.
l Use the rocker switch
<c
>> to move
to the next underscore and select a
character.
You can select up to seven characters.
MIX MAG
-
CDC-A 05
/
-A071
All CD tracks will be played
at random.
The next disc will then also
be selected and played ran-
domly, etc.
MIX OFF
-
The Mix function is deactivat-
I
ed. Discs and tracks will be
selected in numeric order.
To alter the setting:
l Press MIX as many times until the de-
sired function is briefly displayed.
If the function is active, “MIX” will appear in
the right display corner.
Selecting the display mode
You can select the desired display mode for
CD operation:
“NAME”
“TIME”
“NUMBER”
The specified name, for
example “MADONNA”
will be displayed.
The elapsed playback
time of the track is dis-
played, for example
“2
:
32”.
The CD position in the
magazine (disc number)
is displayed, for example
“CD8
T5”.
21
Once you have completed the name as de-
sired:
l
Press
fl
in order to store it.
To quit the naming mode,
l
leave the DSC menu by pressing DSC.
If you would like to name another CD,
.
select a new disc.
You can change any existing name by en-
tering and storing a new one (overwriting).
Deleting CD names with
DSC-UPDATE
You can delete a CD name with the help of
the DSC update function. Use “CDC UPD”
to confirm all of the CDs for which the spec-
ified name is not to be deleted.
l Insert a magazine with CDs for which
the stored information is to be main-
tained.
l Press the DSC button.
l Press A/V to select “CDC UPD”.
l Press
cc
>>.
After the update has been completed,
“NEXT MAG” appears in the display.
l Press the P button on the changer for
approximately two seconds.
The magazine will eject.
l Insert the next magazine.
22