Set subwoofer phase - In addition to the subwoofer location adjustment (see Speaker Location above), your
receiver has an option to ‘invert the phase’ of the information sent to the subwoofer. This adjustment is sometimes
needed to correct ‘lack of low end’ problems created with the interaction between the subwoofer and other large
speakers in a listening room. The correct subwoofer phase adjustment is the one which allows the loudest
listening level.
SETUP CROSSOVERS + LFE
1 Crossover 80.0 Hz THX
2 Hi
g
h Pass 12.0 dB THX
3 Low Pass 24.0 dB THX
4 Peak Limiter 0.0 dB
5 LFE Level 0.0 dB
6 DTS LFE Mode Movie
7 Subwoofer Phase Normal
next item ad
j
ust
MENU setu
p
s
p
eakers
7 Subwoofer Phase Normal
return to SETUP SYSTEM
∠ MENU
MENU4
return to SETUP SPEAKERS
∠ MENU
MENU3
adjust to desired valueVOLUME KNOB
(REW) or
(FF)
2
move to DTS LFE Mode
∧ (UP) or ∨ (DOWN)
(PAUSE) or (STOP)
1
ActionFrom Front PanelFrom Remote
32
p/n 12858 Rev. 0717A