Filter
Top Products
REAR PANEL
The receiver’s back panel is organized into groups of inputs and outputs for audio and video as shown below. See
back of this manual for an enlarged view.
1. AC fuse holder
- Holds the AC Line fuse. Replace only with same type and value.
2. AC input receptacle
- For attaching the supplied AC power cord to the receiver.
3. IEEE 1394 input (optional)
-
For future interface applications.
4. Control outs
- Outputs that allow you to remotely control external devices. (See “Making The Connection“).
5. IR in
- Accepts input from external IR receptors. Connect an IR repeater (“home run”) to IR IN for controlling the
receiver. This method of control is useful when the front IR receptor is blocked (for example, by a cabinet door) or
to control the receiver from another room. This input is typically used in place of an emitter attached to the front
panel.
6. RS-232 input
-
Computer interface applications.
7. Speaker outputs
- Connections for your speakers.
Red binding posts
- speakers (+)
Black binding posts
- speakers (-)
8. DVD Audio inputs
- Connections for a DVD audio or other 5.1 source device.
Red RCA jacks
- right front and surround audio inputs
White RCA jacks
- left front and surround audio inputs
Gray RCA jacks
- center and sub audio inputs
9. Surround outputs
- Variable level outputs for driving external power amplifiers or powered speakers.
10. Antenna inputs
-
Connections for the AM and FM antennas.
11
p/n 12858 Rev. 0717A