Filter
Top Products
Component Video - in addition to S-video and composite video switching, your receiver provides two sets of
component video inputs for DVD and TV/DBS type inputs, and one set of component video outputs. Your
receivers component video connection are passive to minimize the possibility of video format compatibility issues.
Use the same instructions to connect a second (TV/DBS) component video device.
IN 1
Component video input to DVD
red output
Component video input to DVD
g
reen output
Component video input to DVD
blue output
IN 2
Component video input to V1
red output
Component video input to V1
g
reen output
Component video input to V1
blue output
COMPONENT VIDEO
OUT
Component video output to the
video monitor's red input
Component video output to the
video monitor's
g
reen input
Component video output to the
video monitor's blue input
Attach one end of a video interconnect cable to the red video output on the DVD, then attach the other end to the
red component video input (IN 1) connector on the receiver. Repeat for (green) and (blue) video connections.
Repeat for the other (TV/DBS) component source device using component video input (IN 2). Attach one end of a
video interconnect cable to the red component video output (OUT) on the receiver, then attach the other end to the
red video input on the video monitor. Repeat for (green) and (blue) video connections.
DVD Audio - connect a DVD Audio or other 5.1 surround format device, to the receiver’s DVD Audio input.
Connect to the DVD audio
player Subwoofer output
Connect to the DVD audio
player Left Surround output
Connect to the DVD audio
player Ri
g
ht Surround output
DVD AUDIO IN
SURR
Connect to the DVD audio
player Center output
Connect to the DVD audio
player Left Front output
Connect to the DVD audio
player Ri
g
ht Front output
FRONT
SUB CENTER
Attach one end of an audio interconnect cable to the center output on the DVD Audio source device, then attach
the other end to the FRONT center (gray) DVD Audio input on the receiver. Repeat for the front left (white) and
front right (red) audio connection. Attach one end of an audio interconnect cable to the sub output on the DVD
Audio source device, then attach the other end to the SURR subwoofer (gray) DVD Audio input on the receiver.
Repeat for the surround left (white) and surround right (red) audio connection.
15
p/n 12858 Rev. 0717A