Filter
Top Products
Page 3
SAFETY PRECAUTIONS
PLEASE READ BEFORE INSTALLING
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT
TO RAIN OR MOISTURE.
The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the
user of the presence of uninsulated “
dangerous voltage
” within the product’s enclosure
that may be sufficient magnitude to constitute a risk of electric shock to you.
The exclamation point within an equilateral triangle is intended to alert the user of the
presence of important operating and maintenance (servicing) instructions in the
literature accompanying the unit.
Caution: To prevent the risk of electric shock, do not remove cover. No user-serviceable
parts inside. Refer servicing to qualified service personnel.
If an outdoor antenna is connected to the antenna input, be sure the antenna system is
grounded to provide some protection against voltage surges and built up static charges.
Keep outdoor antenna away from power lines.
Turn preamplifier ‘off’ when plugging in or unplugging source cables!!!
The AVP1030 is equipped with raised feet so that continuous ventilation can be
maintained. They also help to reduce acoustic feedback into the preamplifier and
provide a measure of protection against scratching any surface the unit might be resting
on.
Do not alter or remove them
.
Do not stack anything on top of the preamplifier (processor, source, etc).
Do not stack the preamplifier on top of an amplifier.
Always connect the AVP power cord to an unswitched AC outlet for normal operations.
Mistaking
SEND, RCV, CTRL OUT,
or
IR IN
connectors for audio/video inputs or outputs
may damage your preamplifier or other components.