B&K AVP1030 CD Player User Manual


 
Page 31
  
  '$
.
'
  '$
.
'

 )
d
  
 
your station. The display should read (assuming you picked preset 01):
The display should now look like this:
You have now saved the station into the preset 01.
There are two tuner A/V presets you can also save. These presets are the A/V preset
numbers 5 and A5. If you do not save these presets the AVP will always pick the
default frequency of 87.50 MHZ when you press 5 (or A5) and ENTER.
Bring your favorite station up on the display:
Set the desired volume level:
Set the desired mode (example: stereo front to rear):
Note: You may use any mode you wish.
Press
SAVE
,
5
, then
ENTER
, and the display shows:
You have now saved your favorite station under A/V preset
5
. You may follow the same
procedure for the preset
A5
.
Recall a Station
Preset
-
Simply press the
STATION +/-
buttons until your desired station is
displayed.
Auto-program
Station Presets
-
Select the band you wish to auto-program (AM or FM).