B&K AVP1030 CD Player User Manual


 
Page 12
Remote control
The B & K A/V system remote control is specially designed to streamline functions.
Although you can choose to use a universal remote, we think you will agree that the
remote shown below is simple and easy to learn.
Most buttons on the remote control are duplicated through the front panel. This means
it’s easy to operate the preamplifier, whether you prefer using the remote control or the
hands on approach from the front panel. We recommend using the remote control for
simplicity. Use the table below to familiarize yourself with the remote controls functions.
Button:
Function:
POWER OFF
Turns power and CTRL OUT off
POWER ON
Turns power and CTRL OUT on
SYSTEM MUTE
Suppresses sound output
V1
Selects audio/video from component V1
TV-V3
Selects audio/video from component TV-V3
FX
Lets you select between the standard Direct mode or
the last used surround mode
V2
Selects audio/video from component V2
TAPE
Selects audio from component TAPE
VLD
Selects audio/video from component VLD
TUNER
Selects internal TUNER
CD
Selects audio from component CD
FREQ
Lets you directly tune in a station frequency by
specifying it with the numeric keypad
BAND
Selects AM or FM frequency band
STATION -/+
Selects station preset by moving up (+) or down (-)
TUNE -/+
Manually tune a station by moving the frequency up (+)
or down (-)
BALANCE L/R
Adjusts left/right level balance for front and rear
channels (inactive for Pro Logic and Dolby Digital
modes)
MASTER VOLUME -
Lets you decrease (-) or increase (+) the volume on all
/+
channels