Page 17
Video monitor
To add a video monitor to the system.
1.
Attach one end of the composite video interconnect cable to the video input on
the monitor, then attach the other end to the yellow video output on the AVP
labeled MON1 or MON2 (both MON1 and MON2 perform the same function).
VCR connection
The procedure listed is for connecting a VCR player to the V1 analog input on the
AVP. Use the same instructions for connecting another VCR to the V2 analog
input.
1.
Attach one end of the audio interconnect cable to the left audio output on the
VCR, then attach the other end to the white left V1 IN on the AVP.
2.
Attach one end of the audio interconnect cable to the right audio output on the
VCR, then attach the other end to the red right V1 IN on the AVP.
3.
Attach one end of the composite video interconnect cable to the video out on the
VCR, then attach the other end to the yellow video input on the AVP labeled V1.
This connects the VCR to the AVP for viewing tapes. Now complete this procedure to
make recordings through the AVP. Recordings can only be made from analog sources.
4.
Attach one end of the audio interconnect cable to the left audio input on the VCR,
then attach the other end to the white left V1 OUT on the AVP.
5.
Attach one end of the audio interconnect cable to the right audio input on the
VCR, then attach the other end to the red right V1 OUT on the AVP.
6.
Attach one end of the composite video interconnect cable to the video in on the
VCR, then attach the other end to the yellow video output on the AVP labeled V1.
Tape connection
1.
Attach one end of the audio interconnect cable to the left audio output on the
Tape deck, then attach the other end to the white left TAPE IN on the AVP.
2.
Attach one end of the audio interconnect cable to the right audio output on the
Tape deck, then attach the other end to the red right TAPE IN on the AVP.
3.
Attach one end of the audio interconnect cable to the left audio input on the Tape
deck, then attach the other end to the white left TAPE OUT on the AVP.