Filter
Top Products
12
Emerge EMS Installer/User Guide
Chapter 2: Installation
13
Connections at the Receiver
To Connect Displays and Speakers
Dual video and audio outputs are provided on the Emerge EMS receiver. Both sets of ports
provide identical signals and their connection procedures are the same:
1. Attach the video cable from the display unit to the socket labeled
RGBHV OUT on the Emerge EMS receiver.
2. Attach the stereo audio cable from the speakers (or
amplier) to the socket labeled on the
Emerge EMS receiver.
Figure 2.11: Connecting displays and speakers to the receiver unit