Filter
Top Products
20
4 - Operations
Operator
mode
Current
setpoint display
Setpoint
modification
Setpoint entry.
The operation is
acknowledged by
one flash of the
display.
274.8
275.0
230.0
240.0
240.0
4.3 PARAMETER SETTING
Press S or G momentarily to
change the value of 1 unit every
push
Continued pressing of S or G
changes the value, at rate that
doubles every second. Releasing
the button the rate of change
decreases.
In any case the change of the value
stops when it has reached the
max/min limit set for the parameter.
4.3.1 NUMERIC ENTRY
(i.e. the modification of the value of a stored Setpoint from 275.0 to 240.0)
after 2 sec.
—lower
—raise