Filter
Top Products
RPC Operations Guide, Page 34
If the value in the field is not in the menu, the first menu item will be “Add XX to the list”. If this item is
chosen, the number in the field will be entered into the menu. If the number is already in the menu,
the first menu item allows you to remove it. Thus this menu can be easily and quickly customized.
Status Information
Camera status is shown by the color of the Camera Controller background. When the Camera is in
standby, the background is gray. When the camera is running, the background is green. When the
camera is not ready, the background is red. When the camera is not ready, the ARRI logo will be
replaced by a message, identifying the reason for the not ready state.
To the left is the speed the camera is set at, the shutter angle (only visible on cameras with an
electronic shutter) and the TOTAL footage counter. The footage counter will not be visible during
external ramps.
Camera in standby, set to 24 fps and 180° shutter
T
he model number of the connected camera
Camera running
A
RRI logo rotates during camera run