AMS 4081 Stereo Amplifier User Manual


 
4081 User Manual Issue 2
Rear Connectors
(Optional Digital Board not shown).
Mic / Line Input XLRs
Employs standard XLR wiring:
1 Screen
2 Hi
3 Lo
Mic / Line Output XLRs
These can either be used as Direct Outputs from the unit, or as Insert
Sends.
The Output is Post- the Gain control.
Pin-outs as above.
Power input
48 volts, 8-pin connector.
This connector is polarised so can only be connected in one way.
INS IN / LINE OUT
25-way D-type connector contains the Insert Return signals.
The Line Out part of this connector will have no function unless the
optional AD/DA card is fitted (see below).
USB / RS 485
It is possible to 'daisy-chain' multiple units together so they are controlled
via USB on a Mac or PC.
The first unit on the chain should be connected to the Mac or PC by a USB
cable (not supplied).
The blue USB/RS485 button on the rear of this unit should be pushed in.
Subsequent units are connected from the RS 485 OUT of the 1
st
unit, to
the IN on the 2
nd
; from the OUT of the 2nd to the IN of the 3rd and so on
- 6 -