AMS 4081 Stereo Amplifier User Manual


 
4081 User Manual Issue 2
MIDI Port Setup
Please see section on Pro Tools Control.
Reset Current Rack / Reset All Racks
> Click either of these two buttons to either reset the currently selected
rack, or reset all the detected racks back to default values (both Gains
set to minimum values; all switches set to Off)
Please note that the commands to Reset will not be sent until Exit is
clicked and the Setup page closes.
Once the Setup screen is closed, that is when the Reset command will be
sent to the unit(s).
Checkboxes
Mini View Always On Top
With the Mini View selected from the Main screen, a cut-down version of
the Settings screen will be displayed instead.
> Ticking this option ensures that it is displayed on top of all other
Windows screens that may be open.
> With this option unticked, the screen can be placed behind other
Windows screens that may be open.
In all operational aspects, this screen is identical to the full-size screen
except for:
> Click << or >> to step through the racks in numerical order (the
display will reflect which rack is being displayed and whether it is
offline/online).
> Click the Maximise button to restore the screen back to it's full size.
For units that are offline, the large Gain display will be absent.
Create Debug File
This option is for AMS Neve R&D Dept only and has no operational effect.
Auto Load Last Setup File On Startup
With this option ticked, when the control software is opened, the last
Store file that was loaded will be reloaded again.
NB: If the settings on the front of the unit have changed in the meantime,
then these changes will be overwritten with the settings from the Store
file when the software opens.
Auto Restore Previous Setup On Startup
With this option ticked, when the control software is opened, the settings
of all the attached units as they were when the software was closed will be
reloaded again.
NB: If the settings on the front of the unit have changed in the meantime,
then these changes will be overwritten when the software opens.
- 15 -