Filter
Top Products
4081 User Manual Issue 2
Installing the software – PC
USB Driver
Before continuing, please connect the 4081 by USB to the PC and power
the unit up.
Before installing the control software, you will need to install a USB driver
to enable communication between the PC and the 4081.
This can be downloaded from:
http://www.ams-neve.info/ftp/4081_USB_Driver.exe
When presented with the option to either Run or Save, click Save and
specify a location for the file to be saved to.
This is an executable file, so once it has downloaded, double click to run
and install it.
The Windows operating system will be determined, as will the correct
driver for your system.
A Windows CMD screen will show the install by a series of progressing
dots.
As the driver nears the end of it's installation procedure, the CMD screen
will close and the Taskbar will show two messages:
The first will show that the driver has found new hardware and a USB port
has been detected.
The second will show that it is ready to use.
You can now install the 4081 control software.
- 10 -