Filter
Top Products
36-EN
Calling
Dial call
Input the telephone number using the dial.
1 Press the button.
2 Input the telephone number by using the ten keys (0 to
9, and ).
NOTES
• When you want to input +, press the button twice within 2
seconds.
• To erase the numbers you already input, press the PHONE
BOOK button.
To erase one letter
……
press for a while
To erase all letters
……
press and hold for more than 3 seconds.
3 Press the button to place a call.
4 Press the button to finish the call.
The telephone mode will end and return to the original
source mode.
Calling by the address book
You can call up the address book registered in the
portable telephone to call from.
1 Press PHONE BOOK button.
2 Turn the Rotary encoder to select the address search
method, and press the MENU button or MODE button.
Alphabetic Sort List fl ←→ Selecting search (A-Z search)
Alphabetic Sort List: Displays a list sorted in alphabetic order
Selecting Search (A-Z search): Displays addresses by
the input of the initial letter of the address
(Retrieving an addressee by Alphabetic Sort List to
place a call)
1 Turn the Rotary encoder while the Alphabetic Sort List
is displayed. Select the addressee, and then press the
button to place a call.
2 Press the button to end the call.
The telephone mode will end and return to the original
source mode.
(Retrieving an addressee by Selecting Search (A-Z
search) to place a call).
1 Input the initial by pressing one of the ten keys (1 to 9)
and press the MENU button or MODE button.
The list of names beginning with the designated
alphabet is indicated.
2 Turn the Rotary encoder to select the addressee,
press the button to place a call.
3 Press the button to end the call.
The telephone mode will end and return to the original
source mode.
Calling by using the Speed Dial
You can place a call by retrieving one of the telephone
numbers registered in No. 1 to 10 of the address book.
1 Press the button.
2 Press the preset buttons (0 through 9) for at least 2
seconds to place a call.
Or press the preset buttons (0 through 9), then press
the button to place a call.
3 Press the button to end the call.
The telephone mode will end and return to the original
source mode.
Calling by the outgoing history
You can place a call to any of the last 999 received calls
recorded in memory.
1 Press the MENU button.
2 Turn the Rotary encoder to select “DIALED,” and then
press the MENU button or MODE button.
3
Turn the Rotary encoder to select an addressee from the
outgoing history, press the button to place a call.
4 Press the button to end the call.
The telephone mode will end and return to the original
source mode.
NOTE
You cannot use this function if there is not an outgoing history on the unit.
Calling by the incoming history
You can place a call to any of the last 999 received calls
recorded in memory.
1 Press the MENU button.
2 Turn the Rotary encoder to select “RECEIVED,” and
then press the MENU button or MODE button.
3 Turn the Rotary encoder to select an addressee from the
incoming history, press the button to place a call.
MENUPHONE BOOKRotary encoder
Preset buttons (0 through 9, , )
MobileHub™ Link Operation
(
Option
)
MODE