Filter
Top Products
18-EN
SETUP Operation
Setting the Subwoofer Output
You can set the subwoofer output to stereo or monaural.
Make sure to set the correct output for your subwoofer
type.
1 Press and hold the SETUP button for at least 3
seconds.
2 Press the g DN or the f UP button to select
“Subwoofer STEREO.”
3 Press the BAND button to toggle the mode between
STEREO and MONO.
STEREO : Subwoofer stereo (L/R) output.
MONO : Subwoofer monaural output.
NOTE
The initial setting at the factory is Subwoofer STEREO.
4 Press the SETUP button to return to normal mode.
Sound
(
Beep
)
Guide Function
This function will give audible feedback with varying
tones depending upon the button pressed.
1 Press and hold the SETUP button for at least 3
seconds.
2 Press the f UP or g DN button to select “BEEP.”
3 Press the BAND button to toggle the mode between
ON and OFF.
NOTE
The initial setting at the factory is BEEP ON.
4 Press the SETUP button to set the selected mode.
Turning Mute Mode On/Off
If a device having the interrupt feature is connected,
audio will be automatically muted whenever the interrupt
signal is received from the device. This function can be
turned ON or OFF from the head unit by following
procedure below.
1 Press and hold the SETUP button for at least 3
seconds.
2 Press the f UP or g DN button to select the
MUTE mode.
3 Press the BAND button to turn on or off the MUTE
mode.
Each press toggles between the MUTE ON and OFF
modes.
NOTE
The initial setting at the factory is “MUTE ON.”
4 Press the SETUP button again to return to normal
operation.
Scroll Setting
This CD player can scroll the disc and track names
recorded on CD-TEXT discs, as well as the text
information of MP3 files, folder names, and ID3 tags.
1 Press and hold the SETUP button for at least 3
seconds.
2 Press the f UP or g DN button to select the
SCROLL mode.
3 Press the BAND button to toggle the mode between
AUTO and MANU (MANUAL).
• AUTO : the CD text information, the text information
of folder and file names, and the ID3 tags are
scrolled automatically.
• MANU (MANUAL): the display is scrolled only when a
disc is loaded or when a track is changed, etc.
4 When the setting is completed, press the SETUP
button to return to the normal mode.
NOTES
• Initial mode is “MANU (MANUAL).”
• The unit scrolls CD text names, folder names, file names or
ID3 tag display. The disc titles input manually (refer to page
15) cannot be scrolled.
f UP g DN
BAND
SETUP
SOURCE