Filter
Top Products
35-EN
About
MobileHub™
Link
Connect a separately sold Junction Box and a portable
telephone (available from Nokia) to control the incoming
and outgoing calls of the portable telephone.
CAUTION
• Even with hands-free operation, a driver can be distracted
during telephone operation or receiving a call. For the sake of
safety, drivers are requested to refrain from operating the
telephone while driving.
• For the sake of safety, operations other than incoming calls
and Speed-Dial outgoing calls cannot be used.
NOTES
• If a portable telephone is connected, its address book,
incoming and outgoing history, short message history and
standardized sentences are downloaded to the Junction Box.
• Please refer to the instruction manual of the Junction BOX.
Functions that can be operated from CDA-7998/CDA-7897
Incoming Calls
AUTO call
Manual call
Outgoing Calls
Dial Outgoing
Receive Outgoing
Miss call Outgoing
Phone Book
Outgoing (in
alphabetical order)
Phone Book
Outgoing (Search)
Speed Dial
Outgoing
Direct Dial Outgoing
Short Messages
Receiving History
Selection
Sending History
Selection
Short Message
Indication
Mail Arrival
Announcement
(Information icon)
Mail Sending in
Standardized
Sentence
Telephone Mode ON/OFF
1 Press the button, PHONE BOOK button, or
MENU button.
See relevant pages for each item.
NOTES
• When a portable telephone is not connected, “NO PHONE”
is displayed for at least 2 seconds, then the mode returns to
the original source mode.
• When the portable telephone is taken off the Junction BOX
during an incoming or outgoing call, or during a hands-free
call, the call will be treated as an ordinary one by the
portable telephone.
• When there is an incoming call while the power of CDA-7998/
CDA-7897 is OFF, the power of CDA-7998/CDA-7897 will
turn ON automatically for an ordinary call by the portable
telephone, but not for a hands-free call.
• Even if the power of the portable telephone is OFF, when
CDA-7998/CDA-7897 is set to the telephone mode, the power
of the portable telephone will be turned ON.
• Even if the ACC power of the vehicle is turned OFF (even if
the engine is stopped) during a hands-free call, the call is not
disconnected, and an ordinary call by the portable telephone
is possible.
• If there is an incoming call during operation (except an
outgoing call or talking), operation mode will end and switch
to the incoming or talking mode.
• An outgoing call from a portable telephone is also possible.
However, you cannot perform different operations at the same
time from a portable telephone and CDA-7998/CDA-7897 as
malfunction can result.
• With a Junction BOX connected outgoing, incoming, and
sending history will also be recorded in the portable
telephone.
• While telephoning, the setting of CDA-7998/CDA-7897
automatically turns to DEFEAT ON.
Incoming Calls
1 Press the button to receive an incoming call.
2 Press the button to finish a call.
The telephone mode will end and return to the original
source mode.
NOTES
• When the Automatic Calling mode is on, you can talk after 3
seconds of receiving the incoming call.
• Press the button to toggle the mode between Automatic
Calling and Manual Calling.
The initial setting at the factory is Automatic Calling mode.
MENUPHONE BOOK
MobileHub™ Link Operation
(
Option
)
• Press the button during an incoming call to disconnect
it.