Filter
Top Products
32-EN
Checking the XM Radio ID Number
You need to provide XM with the unique XM Radio ID
number for your XM Radio Receiver in order to
subscribe to XM's programming.
This number is an 8 character alphanumeric number
that is printed on a label directly on the XM Receiver.
It can also be displayed on the screen of the CDA-7998/
CDA-7897 in the following way.
1 While receiving XM1/XM2, press the g DN or
f UP button to select channel “0.”
2 The unit alternately displays “RADIO ID” for 2 seconds,
then the ID number for 10 seconds.
3 To cancel the ID number display, set the channel to
other than “0.”
Tips
There is another way to display your ID number.
1. Press and hold the SETUP button for at least 3 seconds.
2. Press the f UP or g DN button repeatedly to select
“ID.”
3. Press the BAND button to display your ID number.
4. After checking your ID number, press the SETUP button to
return to the normal display.
NOTES
• You cannot use “O,” ”S,”” I,” or ”F” for the ID Number.
• You can check your ID number printed on the label on the
package of your XM Satellite Radio Receiver (TUA-T020XM).
Storing XM Channel Presets
1 Press the BAND button to select the desired band
(XM1 or XM2) you want to store.
2 After tuning in the desired channel, press and hold (for
at least 2 seconds) any one of the Preset buttons (1
through 6) into which you want to store the station.
The selected station is stored.
3 Repeat the procedure to store up to 5 other channels
onto the same band.
To use this procedure for other bands, simply select
the band desired and repeat the procedure.
A total of 12 channels can be stored in the preset
memory (6 channels for each band; XM1 and XM2).
NOTE
If you store a channel in a preset memory which already has a
station, the current channel will be cleared and replaced with the
new one.
Receiving XM Channels with the XM
Receiver
(
Optional
)
XM Satellite Radio
∗
is the next generation of audio
entertainment, with up to 100 brand-new digital channels.
For a small monthly fee, subscribers can hear crystal-clear
music, sports, news and talk, coast-to-coast via satellite.
For more information, visit XM’s website at
www.xmradio.com or call 1-800-852-9696
An optional XM Satellite Radio Receiver (TUA-T020XM) may
be connected to the CDA-7998/CDA-7897. With an XM
Receiver connected to the Ai-NET input of the CDA-7998/
CDA-7897, the XM Receiver will be controllable from the
CDA-7998/CDA-7897.
∗ XM and its corresponding logos are trademarks of XM
Satellite Radio Inc.
NOTES
• The controls on the CDA-7998/CDA-7897 for XM Receiver
operation are operative only when an XM Receiver is
connected.
• The XM1 or XM2 band illuminates when in XM mode.
1 Press the SOURCE button to select RADIO Mode.
2 Press the BAND button to select XM1 or XM2.
Each press changes the band:
3 Press the g DN or f UP button to select the
desired channel. Holding the g DN or f UP
buttons will change channels continuously.
XM Radio Operation
→ FM1 → FM2 → XM1 → XM2 → AM
f UP g DN SETUP
SOURCE Preset buttons (1 through 6)
BANDCAT
TITLE