Filter
Top Products
ENGLISH
5
En
SOUND
PREPARATIONS
S
P
E
A
K
E
R
S
HIGH FREQ
S
P
E
A
K
E
R
S
HIGH FREQ
To position the antennas
FM antenna:
Extend the antenna horizontally in a T-shape and fix its ends to
a wall.
AM antenna:
Position and rotate this antenna to find the best reception.
To stand the AM antenna on a surface
Fix the claw to the slot.
FM antenna
AM antenna
2 Connect the blue colored speaker cord to SPEAKERS
HIGH FREQ R jack.
2
Connect the left speaker to the main unit.
Connect the blue colored speaker cord to SPEAKERS HIGH
FREQ L terminal, and another speaker cord to the
SPEAKERS LOW FREQ L terminals in the same manner as
step 1.
3
Connect the surround speakers to the main unit.
Connect the right surround speaker cord to SURROUND
SPEAKERS R terminal, and the left to SURROUND
SPEAKERS L terminal.
4
Connect the center speaker.
Connect the center speaker cord to CENTER SPEAKER
terminal.
5
Connect the supplied antennas.
Connect the FM antenna to FM 75 Ω terminals and the AM
antenna to AM LOOP terminals.
6
Connect other equipments.
Some audio and video equipments (LD player, MD player,
DVD player, TV, etc.) can be connected to this unit.
See page 6 for details.
7
Connect the AC cord to an AC outlet.
The DEMO (Demonstration) will begin when the AC cord is
plugged into an AC outlet for the first time after purchase. To
deactivate the DEMO, set the clock.
POSITIONING THE SPEAKERS
To achieve the optimum effects obtainable with the DOLBY PRO
LOGIC system, it is important to position the speakers properly.
Refer to the following illustration to find out the best location in
your room.
1 Front speakers
2 Center speaker
Position in the center of the two front speakers. In addition,
position on or below the TV set, if connecting a TV set to the
unit.
3 Surround speakers
Place the surround speakers directly to the side of or slightly
behind the listening area. Align them horizontally, about 1
meter above ear height.
NOTE
• No sound is heard from the center and surround speakers when
the DOLBY PRO LOGIC, the DSP SURROUND system and
the 5.1CH (page 25) are set to off.
• The sound is heard from the center speaker when the DOLBY
PRO LOGIC or the 5.1CH (page 25) is set to on.
12 1
3
3