Filter
Top Products
ENGLISH
15
En
PRESETTING STATIONS
The unit can store a total of 32 preset stations for all bands.
When a station is stored, a preset number is assigned to the
station. Use the preset number to tune in to a preset station
directly.
1
Press TUNER/BAND to select a band, and tune in
to a station with fDOWN or gUP.
2
Press aSET to store the station.
A preset number beginning from 1 in consecutive order for
each band is assigned to a preset station.
3
Repeat steps 1 and 2.
No more stations will be stored if a total of 32 preset stations
have already been stored.
NOTE
• When the AM tuning interval is changed, all preset stations are
cleared. The preset stations have to be set again.
•“FULL” is displayed if you attempt to store more than 32 preset
stations.
PRESET NUMBER TUNING
Use the remote control to select the preset number directly.
1
Press TUNER/BAND to select a band.
2
Press numbered buttons 0-9 and +10 to select a
preset number.
Example:
To select preset number 20, press +10, +10 and 0.
To select preset number 15, press +10 and 5.
Selecting a preset number on the main unit
Press TUNER/BAND to select a band.
Press TUNER PRESET repeatedly until the preset number
flashes (preset tuning mode), and turn MULTI JOG. The preset
numbers are selected in sequence as you turn MULTI JOG.
• dPRESET is also available to select the preset number.
Each time the button is pressed, the next highest number is
selected.
To clear a preset station
Select the preset number of the station to be cleared with the
numbered buttons. Then, press sCLEAR, and press aSET
within 4 seconds.
The preset numbers of all other stations in the band with higher
numbers are decreased by one.
Frequency
RADIO RECEPTION
TUNER/
BAND
a
a
f,g
TUNER/
BAND
f,g
TUNER/
BAND
MULTI
JOG
a
s
a
s
c/d
d
TUNER/
BAND
0-9,+10
TUNER
PRESET