Filter
Top Products
ENGLISH
13
En
MEMORIZING THE NEW EQUALIZATION
CURVES
Up to 5 customized equalization curves can be stored on the
manual mode M1-M5.
1
Set a new equalization curve with GEQ FREQ and
MULTI JOG.
See “SETTING A NEW EQUALIZATION CURVE MANUALLY”
on page 12.
The created equalization curve is displayed for 8 seconds.
2
Within 8 seconds, press ENTER.
“GEQ M1” is displayed and all the manual mode indicators
flash for 8 seconds. Go to step 3 within those 8 seconds.
• If this step is not completed within 8 seconds, press GEQ
FREQ first to display “GEQ HIGH” or “GEQ LOW”. Then
press ENTER within 8 seconds.
3
While the manual mode indicators are flashing,
turn MULTI JOG to select a number among from
M1 to M5 and press ENTER.
The equalization curve is stored.
To select the stored equalization curve
1 Press GEQ.
2 Within 4 seconds, turn MULTI JOG to select a desired number
among from M1 to M5.
SOUND
DSP SURROUND
The DSP (Digital Signal Processor) SURROUND system can
create the effect of sound reflected from walls and ceilings. This
system enhances 5 types of sound presence.
DISCO: Sound presence of a disco
LIVE: Sound presence of a live music performance
STADIUM: Sound presence of a stadium
HALL: Sound presence of a concert hall
MOVIE: Sound presence of a movie theater
1
Press SURROUND.
The current mode is displayed.
2 Within 4 seconds, turn MULTI JOG or press f
or g to select a desired mode.
Equalization curves are selected automatically to match the DSP
SURROUND modes and can also be selected or turned off to
suit your preference.
When the music source is monaural
Select LIVE, STADIUM or MOVIE to obtain a simulated stereo
effect. When DISCO or HALL is selected, no sound will be heard
from the surround speakers.
To cancel the selected mode
Press SURROUND twice so that “DSP OFF” is displayed. The
selected equalization curve remains.
To adjust the volume of the surround speakers
Press MANUAL SELECT twice or three times on the remote
control. “S-L” or “S-R” is displayed for 2 seconds. Press f or
g on the remote control within these 2 seconds.
• The DOLBY PRO LOGIC (page 23) and the DOLBY DIGITAL
SURROUND (page 25) surround speakers level is also
changed.
NOTE
The DSP SURROUND mode is canceled when:
- the ECHO is turned on.
- the DOLBY PRO LOGIC is turned on.
- the headphones are plugged in.
- the 5.1CH (page 25) is selected.
GEQ FREQ
MULTI JOG
ENTER
SURROUND
f,g
MANUAL
SELECT
SURROUND