Filter
Top Products
Setting the timer manuallv
If you cannot use VCR PLUS+ system, you can set the timer
manually.
You can set up to 8 programs within one month of the
current date.
MENU —
SET/TRACKING —
+1-
Before starting
- TV VCRICATV
- T-REC
- ENTER
- CANCEL
oCheck that the clock is set correctly.
● Insert a cassette with its erasure prevention tab in place.
● Set the TV VCR/CATV selector to TV VCR.
c If the CATV converter is used for the timer recording,
check that the CATV converter is turned on and the
channel you want to record is selected.
1
2
3
4
Press MENU.
Press SET/TRACKING +/- to select TIMER REC
SET, then press ENTER.
iJIENU
hWMER REC SET
%h SET-UP
mCH SET-UP
mAUTO REPEAT ON >OFF
mSYSTEM SET-UP
I <+,-, ENTER,MENU> I
Press SETiTRACKING +/-to select the line on
which no program has been set, then press
ENTER.
-- .....
~+-}w
-----
..———
-----
<+1–1 ENTER!CANCELI MENU>
Press SET/TRACKING +/- to set the date, then
press ENTER.
If you want to set daily/weekly recordings,
see on the right.
I
I
TIME5 REC SET
DATE
\\l [!/
–2l(MoN)-
START ~lD:!3L3A!vh
END
CH
011
SPEED SP
I <+,-,ENTER,cANcEL{ MENu> ]
5
6
7
8
Set the start time (hours and minutes), the end
time (hours and minutes), the channel number
and the tape speed in the same way as in step 4.
● To change the minutes setting in ten minutes, press
and hold SET/TRACKING +/–.
● The timer program list appears.
If you want to set another program, repeat
steps 3 through 5.
Press MENU twice to return to the normal
screen.
Press T-REC.
● The TIMER REC indicator on the unit lights, and the
unit stands by for timer recording.
● If the TIMER REC indicator does not light, a cassette is
not inserted.
● The cassette is ejected if the cassette’s erasure
prevention tab has been removed.
● You can turn the unit off. The unit automatically starts
recording at the programmed time.
To set the daily/weekly timer
In step 4, press SET/TRACKING – repeatedly before
pressing ENTER.
The setting changes as follows:
Example
The current day (Sunday) - SUN-SAT (Sunday to Saturday)
t
4
MON-SAT (Monday to Saturday)
t
I
One month later
minus two days
t
One month later
minus one days
A
MON-FRI (~onday to Friday)
+
WKL-SAT (Every Saturday)
+
WKL-FRI (Evety Friday)
I
WKL-SUN (Evety Sunday) ~ --”
d
Press SET/TRACKING + to change the display in reverse
order.
After setting, press ENTER.
To cancel a program
Select TIMER REC SET in the menu. And press SET/
Tracking+/– to select the unnecessary program, then
press CANCEL.
(,@p,
● If you want to record the program through the line input,
press SET/TRACKING +/– to display “LI” (from the AUDIO/
VIDEO IN jacks on the rear) or “L2 (from the AUDIO/VIDEO
IN jacks on the front) in step 5 instead of the channel
number.
● To confirm the setting, select TIMER REC SET in the menu
to display the timer program list. Press MENU twice to return
to the normal screen.
● When the power supply is interrupted for more than 5
seconds, the preset program is cleared. In this case, you
have to set the clock and timer again.
-
When the TIMER REC indicator lights, the tape functions
are not operable. To operate the others, press T-REC.
However, remember to press it again to activate timer
recordings.
27 ENGLISH