Recording a TV txomam
Number
buttons
TAPE SPEED
I_
00100
m an
VX-S135
TV VCR/CATV
— TV/LINE
— CHANNELA/V
—OREC/OTR
— II PAUSE/STILL
—
■ STOP
REC/OTR indicator
I
CHANNEL/WV
¤/=ST~p/
●REC/OTR
EJECT
Before starting
Set the TV VCRICATV selector to TV VCR.
~ Insert a cassette
with its erasure prevention tab
in place.
The power turns on automatically.
VX-S135
2 Press TAPE SPEED to select the tape speed,
SP, LP or SLP.
m
m
00:0000 SP
3 Press CHANNEL /W~ repeatedly or the
number buttons to select the channel number
to record.
To select CATV broadcast using the number buttons
When selecting the number between 10 and 19, press O
once to enter the hundreds digit, and then press the
buttons 1 through 9 to enter tens and ones digits. When
selecting the numbers less than 10, press Otwice to
enter the hundreds and tens digits, and then press the
buttons 1 through 9 to enter the ones digit.
To select VHF/UHF broadcast using the number buttons
When selecting the numbers less than 10, press Oto
enter the tens digits, and then press the buttons 1
through 9 to enter the ones digit.
4
Press ● REC/OTR to start recording.
Q
“INDEX flashes for a few seconds. See page
● The REC/OTR indicator on the unit lights.
19.
To stop recording
Press ■ ‘STOP on the r;mote control or ■/4 STOP/
EJECT on the unit.
To pause recording
Press 11 PAUSE/STILL. The REC/OTR indicator on the unit
flashes.
To resume recording, press II PAUSE/STILL or
● REC/
OTR.
To prevent an accidental recording
Break off the erasure prevention tab on the back edge of the
cassette.
To record over the tape again, cover the gap with adhesive
tape.
4
Adhesive tape
-&
Erasure prevention tab
If you want to record the program through the line input, press
CHANNEL A/V or TV/LINE to display “LINEI” (from the
AUDIO/VIDEO IN jacks on the rear) or ‘(LINE2° (from the
AUDIO/VIDEO IN jacks on the front) in step 3.
. The channel cannot be changed during recording.
● If you try to record on a cassette without its erasure
prevention tab, the unit will eject the cassette.
● If recording pause lasts for more than 5 minutes, the unit will
automatically enter stop mode to protect the tape.
● If the power is turned off during recording, the TV turns off,
but the VCR continues to record.
SLP provides three as much recording time as SP, LP
provides twice as much recording time as SP, although
SP produces better picture and audio sounds.
23 ENGLISH