Filter
Top Products
3
4
5
6
7
8
Press SET/TRACl<lNG +/-to select ONCE,
DAILY or WEEKL,Y.
To
record
Select
a single program
ONCE
daily program
DAILY
(See right)
weekly program
such as every
Monday (WKL-MOIN)
WEEKLY
Press ENTER.
● The following tirmer information appears on the
screen.
● If you want to change the setting here, see on the
right.
PLUSCODE 123------
\l;\\/
DATE –2l(MON)-
START z b:3d PM~
END
7:OOPM
CH
023
SPEED SP
<+1-l ENTERlcANcIzLIMENu>
Press ENTER repeatedly until the tape speed
flashes, then press SET/TRACKING +/- to
select SP, LP or !3LP.
r7inia
I
L.1
<+/-/ ENTERjCANCI:LIMENU>
Press VCR PLUS+.
The timer program Iiet appears.
--
--
L.
<+/-/ ENTECANCI:L:fWW J>J>
Press MENU twice to return to the normal
screen.
Press
T-REC.
oThe TIMER REC irldicator on the unit lights, and the
unit stands by for timer recording.
o If the TIMER REC indicator does not light, a cassette is
not inserted.
oThe cassette is ejected if the cassette’s erasure
prevention tab has been removed.
oYou can turn the unit off. The unit automatically starts
recording at the programmed time.
To cancel a program
Select TIMER REC SET in the menu. Then press SET/
l-RACKING +/– to select the unnecessary program, and
press CANCEL.
If the program overlaps another
The overlapped portions will be deleted. The program Iistecl
first on the timer program setting screen has priority c~ver
the succeeding program as illustrated.
8
Program 1 -
Program 2 -
Program 3 +
Actual recorded
potiions
‘“+00
Prog.1 Prog.2
Prog.3
● If “PROGRAM FULL flashes and the timer program list on
step 1, 8 programs are already set, Cancel an unnecessary
program.
oTo confirm the setting, select TIMER REC SET in the menu
to display the timer program list. Press MENU twice tc)return
to the normal screen.
. When the power supply is interrupted for more than 5
seconds, the preset program is cleared. In this case, you
have to set the clock and the timer again.
az%?s
During timer recording, when the tape reaches the end, the
TIMER REC indicator on the unit flashes.
To set the daily program
In step 4, press SET/TRACKING+/– repeatedly to display
the desired daily program as follow:
MON-FRI :
Monday to Friday
MON-SAT : Monday to Saturday
SUN - SAT: Everyday
I
SPEED SP
I
To extend the recording time
After step 4, press ENTER repeatedly until the end time
flashes, then press SET/TRACKING +/– to change the
setting.
When the TIMER REC indicator on the unit lights, the
tape functions are not operable. To operate the others,
press T-REC. However, remember to press it again to
activate timer recordings.
ENGLISH
26