Filter
Top Products
Recordimz with One-Touch Recording (continued)
To stop recording
Press ■ STOP on the remote control or WA STOP/
EJECT on the unit.
To extend the recording duration while
recording
Press ● REC/OTR until the new duration you want appears
on the screen.
To confirm the remaining time of recording, press
● REC/OTR
once during One-Touch Recording.
Setting the timer with VCR
Plus+ svstem
You can greatly simplify timer recordings with VCR Plus+
system. Just enter the VCR Plus+ programming number, a
number assigned to each TV program, and the unit will set
the timer recording automatically. You can find VCR Plus+
programming number in most TV guide magazines.
You can setup to 8 programs. -
VCR PLUS+
● If the power is turned off during One-Touch Recording, the
TV turns off, but the VCR continues to record.
. During One-Touch Recording, when the tape reaches the
end, the TIMER REC indicator on the unit flashes.
MENU —
SET/TRACKING —
+1–
Before starting
TV VCRICATV
— number buttons
— T-REC
— ENTER
— CANCEL
● Check that the clock is set correctlv.
● Check that the channel numbers match the guide channels
which assigned to the TV stations. See page 12.
● Inserl a cassette with its erasure prevention tab in place.
● Set the TV VCR/CATV selector to TV VCR.
●lf the CATV converter is used for the timer recording, check
that the CATV converter is turned on and the channel you
want to record is selected.
1
2
Press VCR PLUS+.
Enter the VCR Plus+ programming number of
the TV program you want to record using the
number buttons.
If you make a mistake, press CANCEL.
PLUSCODE 12.i$~---
}ONCE
DAILY
WEEKLY
<0-9/+ j-/ ENTER/ pR0L3RAM>
25 ENGLISH