Filter
Top Products
Setting the clock
Set DAY, YEAR and hours in the same way as
in step
4.
Press and hold SET/TRACKING+/– to change the
D
6
7
u
You must set the date and time for timer recording.
When you connect the AC cord to the AC wall outlet, the
date and time will be set automatically if the unit receives
the clock adjustment signal. If the unit cannot receive the
clock adjustment signal or reception signal is weak, the unit
may set the clock incorrectly. In this case, you must set the
setting rapidly.
I
CLOCK SET
MONTH 6
DAY
20(SUN)
YEAR
TIME
L999
-lo?@OAM
Jt~
time manually.
<+/-/ ENTER/CANCEL/MENU>
TV VCRICATV
Press SET/TRACKING +/- to set the minutes.
Press and hold SET/TRACKING+/– to change the
setting rapidly.
CLOCK SET
MONTH 6
DAY
20(SUN)
YEAR
i q9P/
TIME
1.?K3&4M
~t~
<+/-/ ENTECANCELEMENU>U>
MENU —
SET/TRACKING —
+1-
Before starting
— ENTER
—CANCEL
Press ENTER to start the clock.
The normal screen returns.
To correct the digits while setting
Before pressing ENTER-in step 7, press CANCEL
repeatedly until the item you want to correct
flashes. Reset the digits using SET/TRACKING +/–.
Set the TV VCR/CATV selector to TV VCR.
1
2
3
Press MENU.
If the clock is not set, SYSTEM SET-UP menu in step 3
appears.
When the power supply is interrupted for more than 5 seconds,
the clock setting is cleared. In this case, you have to set the
clock again.
Press SET/TRACKING +/- to select SYSTEM
SET-UP, then press ENTER.
The date can be set from A.D.1 990 to A.D. 2081.
I
MENU
I TIMER REC SET
ITV SET-UP
mCH SET-UP
FJ,AUTO REPEAT ON FOFF
E& YSTEM SET-UP
$\
<+/-/ ENTEMENu>u>
I
The unit automatically corrects the clock setting once you
set AUTO CLOCK to ON. After unpacking the unit, AUTO
CLOCK is set to ON.
If AUTO CLOCK is set to OFF, follow the procedures below.
Press SET/TRACKING +/- to select CLOCK
SET, then press ENTER.
\$YSTEM SET-UP
■43LOCK SET
b} ANGUAGE/IDIOMA/LANGUE
■ AUTO CLOCK EON OFF
■ STANOARD TIME
I DAYLIGHT SAVING TIME
1
2
Press MENU.
Press SET/TRACKING+/– to select SYSTEM SET-UP,
then press
ENTER.
<+/-/ENTEMENU)U)
I
MENU
mTIMER REC SET
n TV SET-UP
mCH SET-UP
@/WTO REPEAT ON EOFF
;$YSTEM SET-UP
4
Press SET/TRACKING +/- to set MONTH, then
press ENTER.
The day of the week will automatically appear.
I
<+1-/ENTER/MENU)
CLOCK SET
s,ly
MONTH 76-
DAY
i~HU)
YEAR 2000
I
TIME
12:OOAM
I <+/-/ENTEcANCELEMENU>U>
9
ENGLISH