Filter
Top Products
Watchirw a TV txo~ram
POWER
Number
buttons
MUTING
VOLUME +/–
VX-S135
SLEEP
PREV. CH
CHANNEL
Alv
/
/
\
\
I
POWER
~
CHANNEL
A/v
1
Headphone POWER VOLUME
jack
indicator A/v
~
POWER
~
VOLUME
indicator
A/v
~
POWER
CHANNEL
Headphone
~ Press POWER toturnon theunit.
The POWER indicator on the front lights.
z
Press CHANNEL A/V repeatedly or the
number buttons to select the channel number.
To select CATV broadcast using the number buttons
When selecting the number between 10 and 19,
press O
once to enter the hundreds digit, and then press the
buttons 1 through 9 to enter tens and ones digits. When
selecting the numbers less than 10, press Otwice to
enter the hundreds and tens digits, and then press the
buttons 1 through 9 to enter the ones digit.
To select VHF/UHF broadcast using the number buttons
When selecting the numbers less than 10, press Oto
enter the tens digits, and then press the buttons 1
through 9 to enter the ones digit.
s
Press VOLUME +/-to adjust the volume.
To turn off the TV
Press POWER.
To mute the volume
Press MUTING. To restore the volume, press MUTING or
VOLUME +/–.
To recall a previous channel
Press PREV.CH to switch back and forth between the
current channel number and the previous one.
To listen through the headphone, insert a headphone (not
supplied) with a stereo mini plug into the headphone jack on the
front. The sound from the TV speaker is muted.
The power automatically turns off approximately 15 minutes
after a television station has stopped broadcasting.
Press SLEEP repeatedly to select the number of
minutes after which to turn off.
The minutes change in 10-minute intervals, down from 120
minutes. After the set amount of time has elapsed, the unit
turns the power off.
SLEEP
120
A/v
jack
To check the remaining sleep time
Press SLEEP once. The remaining time appears on the
screen.
To cancel the sleep timer
Press SLEEP repeatedly until “SLEEP O“ appears.
13 ENG/../SH