Aiwa CX-ZL10 Stereo System User Manual


 
IMPORTANT
Connect the speakers, antennas, and all optional equipment first.
Then connect the AC cord.
There are no difference between the front speakers. Both
speakers can be connected as L (left) or R (right).
Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is 120 V
AC. Check that the rated voltage matches your local voltage,
7 Connect the right and left speakers to the main
unit.
2 Connect the stereo turntable to the main unit.
Connect the red plug to VIDEO/AUX/PHONO IN R jack, and
the white plug to VIDEO/AUX/PHONO IN L jack.
3 Connect the supplied antennas.
Connect the FM antenna to FM 75 Q terminals and the A,M
antenna to AM LOOP terminals,
AM antenna
h
FM antenna
Yr-
Connect the right speaker cord to SPEAKERS R terminals,
w
Ill
and left to SPEAKERS L terminals.
A
The speaker cord with the white stripe should be connected
lW
f
~lv,
to 0 terminal and the black cord to O terminal.
75.@
~
4 Connect the AC cord to an AC outlet.
The game Demo will begin when the AC cord ;s plugged
into an AC outlet. See page 7 “Game Demo” for details.
To be continued on page 6.
ENGLISH ~