Filter
Top Products
In the programmed edit recording function the tracks can be
programmed while checking the remaining time on each side of
the tape as the tracks are programmed.
1
2
3
4
Insert the tape into Deck 1.
Insert the tape with the side to be recorded on first facing out
from the unit, and wind up the tape with +.
Press CD and load the disc(s).
Press CD EDIT/CHECK twice while pressing
SHIFT on the remote control.
“EDIT” and “PRGM” are displayed.
PRGM
EDIT
● When “Al” is displayed, press CD EDIT/CHECK while
pressing SHIFT again.
Press numbered buttons on the remote control
to designate the tape length.
10 to 99 minutes can be specified.
● + and - are also available to designate the tape length.
Maximum recording
Tape length
time for side A
Tape side A
5 Press one of DISC DIRECT PLAY 1-3 to select a
disc,
Then, press numbered buttons O-9 and +10 on
the remote control to program a track.
Example: To select the 10th track of disc 2, press DISC
DIRECT PLAY 2, then press +10 and O.
Selected track
Selected disc
number
number
Programmed track number
Program number
Remaining time on side A
6
7
8
9
Repeat step 5 for the rest of the tracks for side @
A.
a
‘,m
A track whose playing time is longer than the remaining time .&
cannot be programmed.
l!
Press CD EDIT/CHECK
while pressing SHIFT on w
the remote control to select side B and prc~gram =
the tracks for side B.
Tape side B (reverse side)
Press CD EDIT/CHECK while pressing SHIFT to
select side A and press O on Deck 1.
~
flashes for 10 seconds, and then CD play and recording
of edited tracks for the first side start simultaneously, When
the end of the tape is reached, Deck 1 enters the recording
stop mode. After entering the recording stop modf?, go to
step 9.
Press CD EDIT/CHECK while pressing SHIFT cm
the remote control for recording of [he second
side.
“B” is displayed.
10 Turn over the tape in Deck 1 and press ● to start
recording.
Recording starts.
To stop recording
Press WA on Deck
1. Recording and CD play stop
❑
simultaneously.
To check the order of the programmed track numbers
Before recording, press CD EDIT/CHECK while pressing SHIFT
on the remote control to select side A or B, and press + or
* repeatedly.
Programmed
track numbers
Track number
Disc nunnber
Tape side
Program number
To change the program of each side
Press CD EDIT/CHECK while pressing SHIFT on the remote
control to select side A or B, and press ■ CLEAR to clear “the
program on the selected side. Then program tracks agalin.
To clear the edit program
Press
■CLEAR twice in stop mode so that “EDIT” disappears
on the display.
. Recording is inhibited
if the erasure preventafion tab for the
side of the tape facing out from the unit is broken off.
● Up to 30 tracks can be programmed from any of the inserted
discs.
● “FULL” is displayed if you attempt to program more than 30
tracks.
ENGLISH ‘15