Filter
Top Products
\_ —.. —
n
1
–1
I
J-
Preparation
● Connect the supplied stereo turntable to the main unit. (See
page 5)
“ Set EQUALIZER AMP on the turntable to ON position. (Refer
to the operating instructions of the turntable for details.)
1
2
3
4
Press VIDEO/AUX/PHONO on the main unit.
“VIDEO” appears on the display.
The source name on the display can be changed to “PHONO”.
(See “LISTENING TO EXTERNAL SOURCES” on page 19.)
Adjust
the volume to minimum.
Turn VOLUME counterclockwise until “VOL O“ is displayed.
Play the turntable.
Refer to the operating instructions of the turntable for details.
Adjust the volume according to your preference.
Ifia
El
Dam
caEfl
— CD DIGITALOUT
(OPTICAL)
— VIDEO/AUX/
PHONO IN
Refer to the operating instructions of the connected equipment
for details.
● The connecting cords are not supplied. Obtain the necessary
connecting cords.
● Consult your local Aiwa dealer for optional equipment.
,..
VIDEO/AUX/PHONO IN JACKS
This unit can input analog sound signals through these jacks.
Use a cable with RCA phono plugs to connect audio equipment
(LD players, MD players, VCRs, TV, etc.).
Connect the red plug to VIDEO/ALfX/PHONO IN R jack, and the
white plug to VIDEO/AUX/PHONO IN L jack.
When connecting a turntable
Use an Aiwa turntable equipped with a built-in equalizer amplifier.
,.
,,,.-
CD DIGITAL OUT (OPTICAL) JACK “ ‘
This unit can output CD digital sound signals through this jack.
Use an optical cable to connect digital audio equipment (DAT
deck, MD recorder, etc.).
Remove the dust cap @ from the CD DIGITAL OUT (OPTICAL)
jack. Then, connect an optical cable plug to the CD DIGITAL
OUT (OPTICAL) jack,
4F
When the CD DIGITAL OUT (OPTICAL) jack is not being
used
Attach the supplied dust cap.
18 ENGLISH