Aiwa CX-ZL10 Stereo System User Manual


 
PLAYING DISCS
Load discs.
To dav all
discs in the disc compartment, press E.
Play begins with the disc on tray 1.
Number of track being played Elapsed playing time
To dav one disc only, press one of DISC DIRECT PLAY
1-3.
The selected disc is played once.
Selected disc tray nu~ber
Number of track being played
Elapsed playing time
To stop play, press W.
To pause play, press II. To resume play, press again.
To search for a particular point during playback, keep -
or * pressed and release the button at the desired point.
To skip to the beginning of a track during playback, press
u or - repeatedly.
To remove discs, press AOPEN/CLOSE.
To start play when the power is off (Direct Play Function)
Press CD. The power is turned on and play of the loaded disc(s)
begins.
When AOPEN/CLOSE is pressed, the power is also turned on
and the disc compartment is opened.
To check the remaining time
During play, press CD EDIT/CHECK on the remote control while
pressing SHIFT. The amount of time remaining until all tracks
finish playing is displayed. To restore the playing time display,
repeat the above.
Selecting a track with the remote control
1 Press one of DISC DIRECT PLAY 1-3 to select a disc.
2 Press numbered buttons O-9 and +1Oto select a track.
Example:
To select the 25th track, press +1O, +1Oand 5.
To select the 10th track, press +1Oand O.
The selected track starts to play and continues to the end of
that disc.
Replacing discs during play
While one disc is playing, the other discs can be replaced without
interru~ting Dlay.
1
2
3
Press Disc CHANGE.
Remove the discs and replace with other discs.
Press AOPEN/CLOSE to close the disc compartment.
When Ioadina an 8-cm (3-inch) disc, make sure to place it ontQ,
‘3
the inner circle of the trav rxecisely. Otherwise, the dlisc may m,,,
be damaged or the disc compartment will not open. If it dae.s
~
not open, please consult your Aiwa dealer for repair.
Do not place more than one compact disc on one disc tray.
a’
Do not tilt the unit with discs loaded. Doing so may cause
g
malfunctions.
~
When transporting the unit, remove the discs from the trays.
. Do not use irregular shape CDs (example: heart-shaped,
octagonal ones). It may result in malfunctions.
:Z:
RANDOM/REPEAT PLAY
“r”
*’
Use the remote control.
‘“d
,+
a
RANDOM play
e
All the tracks on the selected disc or all the discs can be playecl
randomly.
REPEAT play
A single disc or all the discs can be played repeatedly.
Press RANDOM/REPEAT while pressing SHIFT.
Each time it is pressed, the function can be selected cyclically.
RANDOM play RANDOM lights up on the display.
REPEAT play G lights upon the display.
RANDOM/REPEAT play — RANDOM and ~ light up on the
display.
Cancel RANDOM and ~ disappear from the display.
To dav all discs, press > to start play.
To Dlav a sinale disc, press one of DISC DIRECT PLAY
1-:3tc}
start play.
m
During random play it is not possible to skip to the previously
played track with +.
The silent portions between tracks recorded on a CDI can be
skipped during playback.
7 Press CD/CD BLANK SKIP on the main unit.
“CD BLANK SKIP ON” is displayed and a small dot will appear
in the display.
Small dot
2
Press E to start playback.
The silent portions between tracks will be skipped, and the
sound will be played back without interruption. If a track fades
out (ends with the sound gradually decreasing), the fadeout
portion will also be skipped.
To return to normal playback
Press CD/CD BLANK SKIP again, “CD BLANK SKIP OFF’” is
displayed and the dot in the display will disappear.
There may be a case where BLANK SKIP PLAY cloes not
function correctly.
c BLANK SKIP PLAY is automatically canceled when performing
Al EDIT RECORDING (page 14), PROGRAMMED EDIT
RECORDING (page 15), or recording during PROGRAMMED
PLAY (page 12) or RANDOM PLAY (page 11).
ENGLISH I 1