Filter
Top Products
Inserting batteries
Detach the battery cover on the rear of the remote control and
insert two R6 (size AA) batteries.
R6(AA)
When to replace the batteries
The maximum operational distance between the remote control
and the sensor on the main unit should be approximately 5 meters
(16 feet). When this distance decreases, replace the batteries
with new ones.
To use SHIFT on the remote control
Buttons @ have two different functions. One of these functions
is indicated on the button, and the other on the plate above the
button.
To use the function on the button, simply press the button.
To use the function on the plate above the button, press the button
while pressing
SHIFT.
To use FUNCTION on the remote control
The FUNCTION substitutesforthe functionbuttons(TAPE DECK
1/2, TUNER, VIDEO/AUX, CD, MD)
on the main unit.
Each time
FUNCTION is pressed, the next function is selected
cyclically.When tapes are inserted
in both decks, each deck is
selected with
FUNCTION.
<>/F PRESET on the remote control
The function is same as that of 4> on the main unit.
@
SHIFT
4 blb
FUNCTION
PRESET
m
● If the remote control is not going to be used for an extended
period of time, remove the batteries to prevent possible
electrolyte leakage.
● The remote control may not operate correctly when:
- The line of sight between the remote control and the remote
sensor inside the display window is exposed to intense light,
such as direct sunlight
- Other remote controls are used nearby (those of a television,
etc.)
5 ENGLISH
1:
ii
,,
~1
,— ___
Ii. --
_—— —-i
—
\—
~
/
To turn the power on
Press
one of the function buttons (TAPE, TUNER, VIDEO/AUX,
CD, MD). Playback of the inserted disc or tape begins, or the
previously tuned station is received (Direct Play Function),
POWER is also available.
When the unit is turned on, the disc compartment may open and
close to reset the unit.
To
turn the power off
Press POWER.
Flash windows
The windows on the top of the unit and the cassette decks light
up or flash while the unit is being powered on.
To turn off the light of the top window, press 9 while pressing
CD. To turn back on, repeat the above.
Game Demo
When the AC cord is connected, the display window demonstrates
the game Demo. When the power is turned on, the game Demo
is overridden by the operation display. When the power is turned
off, the game Demo is restored.
To
cancel the game Demo
Press DEMO. To re-activate the game Demo, press DEMO
again.
To play the the game Demo
1 Press DEMO so that the game Demo displays,
2 Press 4>,
Three numbers on the display start to run.
3 Press
■ once.
The number on the left side stops.
4
Press ■ twice to stop the remaining two numbers.
Scoring:
20
points are given to start the game.
If all the numbers are equal, 50 points are added to the score
If not eaual, one point is subtracted.
If the gained points reach 9999, you win.
If the gained points fall to O, you lose.
To reset the game Demo
Press DEMO twice, then press +-. The game starts again.
● During playing the game Demo, ■ and <E are available
only for the game Demo, Cancel the game Demo to use these
buttons for the functions such as CD playing, etc.
● During the game Demo, some indicators unrelated with the
actual operation light up on the display.