Filter
Top Products
l. —._ _
a
5
3,7,8,9
E ;
4,5
c)=;~
3,7,8,9
o’
In the programmed edit recording function the tracks can be
programmed while checking the remaining time on each side of
the tape.
m
The programmed edit recording will not start from a point halfway
in the tape. The tape must be recorded on from the beginning of
either side.
1
2
3
4
5
Insert the tape into deck 2.
Insert the tape with the side to be recorded on first facing out
from the unit.
Press CD and load the disc(s).
Press EDIT/CHECK twice while pressing SHIFT
on the remote control.
“EDIT” and “PRGM” appear.
● When “AI” is displayed, press EDIT/CHECK while pressing
SHIFT again.
Press numbered buttons on the remote control
to designate the tape length.
10 to 99 minutes can be specified.
c The +, - or MULTI JOG are also available to designate
the tape length.
Tape length
Tape side A (front side)
Maximum recording
time for side A
Press DISC DIRECT PLAY 1-3 to select a disc.
Then, press numbered buttons O-9 and + 10 on
the remote control to program a track.
Example:To select the 10th track of disc 2, press DISC
DIRECT PLAY2, then
press +10 and O.
Remaining time Programmed
on side A
tracks
6
7
8
9
Repeat step 5 for the rest of the tracks for side
A.
A track whose playing time is longer than the remaining time
cannot be programmed.
Press EDIT/CHECK while pressing SHIFT on the
remote control to select side B and program the
tracks for side B.
After confirming “Bon the display, repeat step 5.
Tape side B (reverse side)
I
Press EDIT/CHECK while pressing SHIFT to
select side A and press
● REC/REC MUTE to
start recording.
CD play and recording of edited tracks for the first side start
simultaneously. When the last track programmed for side A
is finished, deck 2 enters the recording stop mode. After
entering the recording stop mode, go to step 9.
Press EDIT/CHECK while pressing SHIFT on the
remote control for recording of the second side.
“B” is displayed.
10 Turn over the tape in deck 2 and press ● REC/
REC MUTE to start recording.
Recording starts.
To stop recording
Press ■ . Recording and CD play stop simultaneously.
To check the order of the programmed track numbers
Beforerecording,pressEDIT/CHECKwhilepressingSHIFT on
the remotecontroltoselectsideA or B,and press- or *
repeatedly.
Disc number Track number Program number
Tape side
Programmed track
numbers
To change the program of each side
Press EDIT/CHECK while pressingSHIFT on the remote control
to select side A or B, and press ■ CLEAR to clear the program
on the selected side. Then program tracks again.
To clear the edit program
Press ■ CLEAR twice so that “EDIT” disappears on the display.
‘ CD EDIT/CHECK on the unit is also available instead of EDIT CHECK
on the remofe control.
7 ~ ENGLISH