Filter
Top Products
DISC CHANGE
\
EDIT/CHECK
< RANDOM/
e
REPEAT
\
caoo ..
-0-9,+10
OOQ
00
00
3: z
SHIFT
~
Press CD, then press A OPEN/CLOSE to open the
disc compartment. Load disc(s) with the label side
up.
To ~lav one or two discs, placethe discsontray 1 and2.
To ~lav three discs, pressDISC CHANGE to rotatethe trays
after placing two discs. Place the third disc on tray 3.
Close the disc compartment by pressing A OPEN/CLOSE.
a
~@$~
DISC CHANGE
A
,,!,..-
Tray 1
El
w>
<
--
Tray number of the
disc to be played Total playing time
Total number of tracks
Load discs.
To dav all discs in the disc compartment, press 4>.
Play begins with
the disc on tray 1.
Number of track being played
Elapsed playing time
To
play one disc only, press DISC DIRECT PLAY 1-3.
The selected disc is played once.
To
stop play, press ■ .
To
pause play, press Il. To resume play, press again.
To search for a particular point during playback,
keep -
or - pressed and release it at the desired point.
To skip to the beginning of a track during playback, press
< or - repeatedly or turn MULTI JOG.
To remove discs,
press A OPEN/CLOSE.
To
start play when the power is off (Direct Play Function)
Press CD, The power is turned on and play of the loaded disc(s)
begins.
When 4 OPEN/CLOSE is pressed, the power is also turned on
and the disc compartment is opened.
TO
check the remaining time
During play, press EDIT/CHECK on the remote control while
pressing SHIFT. The amount of time remaining until all tracks
finish playing is displayed. To restore the playing time display,
repeat the above.
*CD
EDIT/CHECK on the unit is also available instead of EDIT
CHECK on the remote control.
Selecting a track with the remote control
1
2
Press DISC DIRECT PLAY 1-3 to select a disc.
Press numbered buttons O-9 and
+1Oto select a track.
Example:
To select the 25th track, press +10, +10 and 5.
To select the 10th track, press +10 and O.
The selected track starts to play and continues to the end of
that disc.
Replacing discs during play
While one disc is playing, the other discs can be replaced without
interrupting play.
1 Press DISC CHANGE.
2 Remove the discs and replace with other discs.
3 Press A OPEN/CLOSE to close the disc compartment.
● When loading an 8-cm (3-inch) disc, put it onto the inner circle
of the tray.
● Do not place more than one compact disc on one disc tray.
● Do not tilt the unit with discs loaded. Doing so may cause
malfunctions.
9 ENGLISH