Agilent Technologies 81A Stereo System User Manual


 
84 Agilent N5161A/62A/81A/82A/83A MXG Signal Generators User’s Guide
Optimizing Performance Preliminary
Using the Dual Power Meter Display Preliminary
Figure 5-6 Running Calibration(s) Bar (Zeroing Sensor)
NOTE The U2000 Series USB Power Sensor, does not require a 50 MHz calibration. If a
calibration is attempted with the U2000 Series Power Sensors, the MXG displays a
message reading:
The U2000 series power sensor does not require a 50 MHz calibration. Refer to
Figure 5-7 on page 84.
Figure 5-7 Diagnostic Dialog Box Displayed for U2000 Power Sensor
5. Press Return > Return > Channel A to On
The current power meter sensor reading should be displayed in the ChA portion of the
instrument's display and in the upper right portion of the display under Power Meter. Refer to
Figure 5-8.
For details on
each key, use key
help as described
on see page 42.
For details on
each key, use key
help as described
on see page 42.