1-58
BEFORE USING THE MACHINE
Stapler
Punch module for finisher (3 trays)
*1 Output capacity varies according to environmental conditions of the installation location, type of paper used, and the
condition of the machine.
*2 Offset and staple functions cannot be used.
*3 The number of sheets that can be stapled assumes a standard paper weight of 80 g/m
2
(301 lbs.) with covers
consisting of two sheets of between 106 g/m
2
to 209 g/m
2
. (28 lbs. to 110 lbs.)
Allowed paper sizes for stapling A3, B4, A4, A4R, B5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x
13", 8-1/2" x 11", 8-1/2" x 11"R, 8K, 16K (There are four staple positions: 1 Staple at
Front, 1 Staple at Back, 2 Staples, and 1 Staple at Back (diagonal).)
Maximum number of sheets for
stapling
*3
100 sheets (A4, B5, 8-1/2" x 11", 16K)
50 sheets (A3, B4, A4R, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5",
8-1/2" x 13", 8-1/2" x 11"R, 8K)
Model MX-PN10B
Hole punching 3 holes or 2 holes
Allowed paper sizes for punching 3 holes: A3, A4, 11" x 17", 8-1/2" x 11"
2 holes: A4R, 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13",
8-1/2" x 11"R
Allowed paper weight for punching 56 g/m
2
to 128 g/m
2
(15 lbs. to 32 lbs.)
Power supply Supplied from finisher
Dimensions 95 mm (W) x 715 mm (D) x 392 mm (H) (3-3/4" (W) x 28-9/64" (D) x 15-7/16" (H))
Weight Approx. 3.9 kg (Approx. 8.6 lbs. )
