1-35
BEFORE USING THE MACHINE
Loading transparency film
Be sure to load transparency film oriented vertically. (Transparency film cannot be used in tray 4.)
CHANGING THE PAPER SIZE IN PAPER TRAY 4
Plain paper from A3 to B5 (11" x 17" to 7-1/4" x 10-1/2"R size) can be loaded in tray 4. For paper that can be used, see
"Types of paper that can be used in each tray" on page 1-28.
The procedures for loading paper in tray 4 and changing the paper size are the same as for tray 3 (see page 1-32).
3
Place the tabbed paper in the tray.
Place the tabbed paper with the print side face up.
[Example]
Make sure that the positions of the tabs correspond with the
originals as shown below.
4
Gently push the tray in and set the paper type to tabbed paper.
☞
7. SYSTEM SETTINGS "Paper Tray Settings" (page 7-13)
When referring to the explanations of tray 3, keep in mind that special papers such as tabbed paper and transparency film
cannot be used in tray 4. Use tray 3 for special paper.
ABC
DEF
GHI
JKL
Front side
1st page
1st page
2nd page
2nd page
3rd page
3rd page 4th page
4th page
Tabbed paper
Original
