
Organiser
100
Alarm
(Menu 5.4)
This feature allows you to:
• Set an alarm to ring at a specific time.
• Set the phone to switch on automatically and ring
the alarm even if the phone is switched off (the
Autopower
menu option set to
Enable
).
The following options are available:
Once Alarm:
the alarm rings only once and is then
deactivated.
Daily Alarm:
the alarm rings every day at the
same time.
Morning Call:
the alarm rings to wake you up in
the morning.
To set the alarm:
1. Choose the type of the alarm to be set.
2. Enter the required time and press the
OK
soft
key.
3. If you select
Morning Call
in step 1, select a
day of the week for the morning call to sound
and press the
OK
soft key.
Remove Alarm:
deactivates all alarm settings.
Autopower:
when this option is set to
Enable
,
the phone will automatically turn on at the specified
time and the alarm will ring.
If this menu option is set to
Disable
and the phone
is switched off at the specified time, the alarm will
not ring.
To stop the alarm when it rings, open the folder and
press the
Exit
soft key.
Organiser
101
While setting or viewing an alarm, the following
options are available when you press the
Options
soft key.
Remove Alarm
: deactivates the current alarm.
Alarm Sound Set
: allows you to select the alarm
melody.
Calculator
(Menu 5.5)
Using this feature, you can use the phone as a
calculator. The calculator provides the basic
arithmetic functions: addition, subtraction,
multiplication and division.
Using the Calculator
1. Enter the first number using the numeric keys.
2. Press the right soft key until the required
arithmetic symbol appears:
+
(add),
-
(subtract), (multiply),
/
(divide).
3. Enter the second number.
4. Repeat Steps 2 to 3 as many times as needed.
Notes:
• To erase any mistakes and clear the display, press
the
C
key.
• To include a decimal point or a bracket, press the left
soft key until the required symbol is displayed.
5. To get the result, press the key.