Phone Settings
88
Once the correct password has been entered, you
can use the phone until you switch it off.
The following options are available:
Disable:
you are not asked to enter the phone
password when you switch the phone on.
Enable:
you are required to enter the phone
password when you switch the phone on.
Change Password
The Change Password feature allows you to change
your current phone password to a new one. You
must enter the current password before you can
specify a new one.
The password is factory set to “00000000.” Once
you have entered a new password, you are asked to
confirm it by entering it again.
SIM Lock
When the SIM Lock feature is enabled, your phone
only works with the current SIM. You must enter
the SIM lock code.
Once you have entered the lock code, you are
asked to confirm it by entering it again.
To unlock the SIM, you must enter the SIM lock
code.
Phone Settings
89
FDN Mode
The FDN (Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
The following options are available:
Disable:
you can phone any number.
Enable:
you can only call phone numbers stored in
the phonebook. You must enter your PIN2.
Note:
Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
To change your PIN2, refer to the
Change PIN2
menu option (
Menu 4.6.7
) below.
Change PIN2
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
Once you have entered a new PIN2, you are asked
to confirm it by entering it again.
Note:
Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
LCD Settings
(Menu 4.7)
Contrast
This option allows you to adjust the contrast of each
display screen to make them lighter or darker.
Adjust the brightness using the and keys or
the and keys on the left side of the phone.
