A SERVICE OF

logo

Getting Started 10
5.
Press the
Next
soft key.
6. Enter your name and
your e-mail account
name as you wish
them to be displayed
on your screen, then
press the
Next
soft
key.
7. You are notified that
e-mail setup is
complete:
If you want, select a
new
Automatic Send/
Receive
value.
Press the
Finish
soft
key.
8. Your account
information is verified and you are returned to the
Getting
Started
menu.
Set up a device password
You can setup your i225 to
require a password every
time it’s turned on.
1. From the
Getting
Started
menu, select
Set up a device
password
Setup a
password
.
The
Password
Settings
screen
appears in the
display.
2. If you want, enter or
select values for the
following options:
Prompt if device
unused for
(1 Minute,
5 Minutes, 15 Minutes, 30 Minutes, 1 Hour, 1.5 Hours, 2 Hours, 12
Hours, or 24 Hours).
Tip:
You must check the
Prompt if device unused for
option to activate the
other options.
Password type
(Simple PIN or Strong alphanumeric).