Section 13: Setup 179
Display Settings
Section 13
Banner
Create your own personalized greeting that appears in
the display while your phone is in standby mode.
1. In standby mode, press the MENU (left) soft key ( ),
then press (for Setup), (for Display), and
for Banner.
Tip: Press and hold
to erase an existing banner, if necessary.
2. Enter a word or short phrase to appear in your phone’s
display while in standby mode (Up to 12 characters).
See “Section 5: Entering Text” on page 63 for more
information.
3. Press the key to save the new banner.
Backlight
You can set the backlight for your display or keypad to
remain on for a specified period of time or remain on as
long as the folder is open.
Note: Prolonged backlight use drains your battery faster.
1. In standby mode, press the MENU (left) soft key ( ),
then press (for Setup), (for Display), and
for Backlight
. The following sub menus appear in the
display
:
v LCD — Sets the time the internal display backlight remains on
after a period of inactivity. Optional settings are: 5 seconds, 10
seconds, 15 seconds, and Folder Open.
v Keypad — Sets the amount of time the keypad backlight
remains on after a period of inactivity. Optional settings are: 5
seconds, 10 seconds, 15 seconds, and Folder Open.
9
wxyz
2
abc
3
def
CLR
OK
9
wxyz
2
abc
4
ghi
