Zoom R24 Stereo Receiver User Manual


 
9
Audio interface manual
Using control surface functions
When using the R24 connected by USB as an audio interface, the R24 keys and faders
can be used to control Cubase LE 5’s transport and mixer.
HINT
Assigning keys
Foralistoffunctionsthatcanbeassignedtothe
knobsandkeysoftheR24,aswellasothertrans-
port/functionkeysthataresupportedbyCubase
LE5,pleaseconsultthe“Controlsurfacefunctions
quickreferenceguide”inthismanual.
About the control surface Control surface setup
In control surface mode the keys and knobs on
the R24 can be assigned to particular Cubase
LE 5 functions.
6
Then, launch Cubase LE 5.
Transport section P.10
About banks P.11
Fader section P.11
Reference: Control surface functions quick
reference guide
P.14
7
From the Cubase LE 5 “Devices”
menu, select “Device setup…”
Open the “Device Setup…” window.
8
At the top left of the Device setup
window [+], [−] and [|<] buttons
appear. Click the [+] and select
“Mackie Control”
9
Set the MIDI input and output
MIDI input: ZOOM R16_R24
MIDI output: ZOOM R16_R24
See R24 setup and connection steps 1–5 on P7~8