ZETA Music Systems ZMC-200 Speaker System User Manual


 
43
ZETA Music Systems, Inc.
ZMC-200 Manual Rev2.0
Chain Number
Preset Chain and Number
Step Number
This information is displayed when the “Chain” button is pressed.
The following Table shows the location of each of these
information labels:
Chain Name Chain Number
Preset Name & Number Step Number
Example:
No Name 5 5
Heaven 17 1
CREATING CHAIN PRESETS
Press the CHAIN button on the front of your ZETA SYNTHONY II, and
select the desired chain preset using the +/- Value buttons. Press the EDIT
button, and you are now ready to begin programming your chain. The
following parameters can be accessed by pressing the +/- Parameter
buttons:
CHAIN PRESET NAME
(max. 12 Characters)
Use a name that describes the function of of your chain, e.g. the name of
the song with which it will be used. Press the ENTER button and use the
+/- Value buttons to select each character and the +/- Parameter buttons to
maneuver to the next (or previous) character.. Press the EXIT button when
you are finished naming your Chain Preset. As with all other Text-Editor
functions some of the front panel buttons have special functions when in
this mode (A…Z, a…z, !…9, space, insert, delete).
PROGRAM
(1…128)
Use the +/- Value buttons to select the desired Preset number for the
present step. Press the ENTER button. This moves you to the next step in
the chain.