ZETA Music Systems ZMC-200 Speaker System User Manual


 
32
ZETA Music Systems, Inc.
ZMC-200 Manual Rev2.0
VOLUME:
(OFF, 0...127)
In order to have a balanced relationship between the volume of the Main
and Hold presets, you have the option to adjust the volume of Hold presets.
The settings within the Hold preset itself will not be affected.
SEQ PATTERN
(OFF, 1…32)
If you own the ZETA SYNTHONY II, you have the option alongside the
normal Hold Preset, to set a drum pattern sequence )see UTILITY MODE,
EDIT SEQUENCE). As soon as you press the hold pedal, the selected
drum pattern will play on a separate MIDI channel. The pattern will be
repeated until you press the hold pedal two times quickly. Choose one
drum pattern of 1-32, that you want to play when you press the hold pedal,
or set this parameter to OFF.
SEQ TRACK
(OFF, 1…8)
You can set a complex track sequence to play instead of a pattern (see
UTILITY MODE, EDIT SEQUENCE) parallel to the hold preset. As soon
as you press the hold pedal, the selected track pattern will play on a
separate MIDI channel. The pattern will be repeated until you press the
hold pedal two times quickly. Or you can set the number of times that you
want the sequence to be played. Choose one track pattern of 1-8, that you
want to play when you press the hold pedal, or set this parameter to OFF.
Please note that you can only use one of the two sequence possibilities at a
time: either SEQ TRACK or SEQ PATTERN. Make sure the other one is
set to OFF.
SEQ TEMPO
(EXT., 41…240)
The tempo of your sequence can be set externally using Midi clock
(EXT/MIDI IN) or internally using BPM (beats per minute) between 41
(very slow) and 240 (very fast). In the case of external synchronization,
(e.g.. MIDI-Drums, sequencer software) the sequence will only start when
the “start” command is received from the MIDI IN port.
LAYER…
This function allows you to play 2 sounds over each other (layer). In this
way you can play particularly full, rich sounds by layering them one on top
of the other. Using the sub menu (ENTER) select a sound for layering.
Now when you press the hold pedal, this sound will be added to your
present sound as long as the hold pedal is depressed. After pressing the
ENTER button, you can set the following parameters in the sub menu: