5 En
PREPARATION
CONNECTION/
INITIAL SETTINGS PLAYBACK SETTINGS
TROUBLESHOOTING
APPENDIX
Controls and functions
1 Front panel display
Shows information about the operational status of this unit.
(☞p. 7)
2 SURROUND indicator
Lights up according to the input signal.
3 STATUS indicator
Lights up to show the system condition.
4 INTELLIBEAM jack
Connect the supplied IntelliBeam microphone for AUTO SETUP
(☞p. 17).
5 Remote control sensor
Receives infrared signals from the remote control. (☞p. 8)
6 Remote control sensor of a TV
Receives infrared signals from the remote control of your TV
when connecting the IR Flasher. (☞p. 10)
7 INPUT key
Selects playback component. (☞p. 15)
8 VOLUME +/- key
Controls the volume of the unit. (☞p. 26)
9 key
Turns on the unit or set it to the standby mode.
Controls and functions
Front panel
12
3
45 6
789
Displayed
color
Input signal
Blue Following surround audio signal formats:
Dolby TrueHD, Dolby Digital Plus, DTS-HD
Master Audio, DTS-HD High Resolution, Multi-
channel Linear PCM
Orange Surround audio signal other than above
Off Audio signal other than above or no signal
Light Power
HDMI
CONTROL
(☞p. 43)
Interlock
Mode
(☞p. 34)
Green On – –
Red Standby On –
Standby – On
Off Standby Off Off
In the standby mode, this unit consumes a small amount of
power in order to receive infrared signals from the remote
control or to search for HDMI signals.
Note