Yamaha YSP-2200BL Speaker User Manual


 
37 En
Setup menu
PREPARATION
CONNECTION/
INITIAL SETTINGS PLAYBACK SETTINGS
TROUBLESHOOTING
APPENDIX
Setup menu list
Category Menu Sub menu Features Page
MEMORY LOAD Memory 1, Memory 2,
Memory 3
Loads the beam and sound settings saved in the
memory.
p. 23
SAVE Memory 1, Memory 2,
Memory 3
Saves the current beam and sound settings to the
memory.
p. 22
AUTO SETUP BEAM+SOUND
OPTIMIZE
AUTO SETUP Optimizes the beam and sound settings automatically.
p. 20
BEAM OPTIMIZE
ONLY
Optimizes the beam settings automatically.
p. 20
SOUND OPTIMIZE
ONLY
Optimizes the sound settings automatically.
p. 20
MANUAL SETUP SETTING
PARAMETERS
INSTALLED POSITION,
listening room settings,
distance settings
Adjusts the listening room and listening position
settings. p. 38
BEAM
ADJUSTMENT
HORIZONTAL ANGLE,
BEAM TRAVEL
LENGTH, FOCAL
LENGTH (Front L, Front
R, Center, Surround L,
Surround R)
Adjusts the various sound beam settings.
p. 39
IMAGE
LOCATION
LEFT, RIGHT Adjusts the sound position of the front right and left
channels.
p. 40
SOUND SETUP TONE CONTROL TREBLE, BASS Adjusts the output level of high-frequency or
low-frequency sound.
p. 40
SUBWOOFER LFE LEVEL, DISTANCE Configures the subwoofer settings. p. 40
AUDIO DELAY AUTO LIP SYNC Adjusts delay in output timing between video signals
and audio signals.
p. 40
TV, HDMI1-3,
INPUT1, INPUT2,
INPUT3
Adjusts output timing of audio signals manually.
p. 40
Dynamic Range
Control
Adaptive DRC, Dolby/
DTS DRC
Adjusts the dynamic range.
p. 41
CHANNEL LEVEL Front L, Front R, Center,
Surround L, Surround R,
Subwoofer
Adjusts the volume of each channel.
p. 41
SOUND OUT CHANNEL OUT Configures the sound beam output settings. p. 41
SURROUND Configures the surround audio signal output settings. p. 41
INPUT MENU INPUT
ASSIGNMENT
OPTICAL1, OPTICAL2,
COAXIAL, ANALOG
Assigns jacks according to the component to be used.
p. 42
AUDIO SELECT
(HDMI1, HDMI2,
HDMI3)
Configures the sound output from HDMI jack
p. 42
INPUT RENAME TV, INPUT1, INPUT2,
INPUT3, HDMI1,
HDMI2, HDMI3
Renames the displayed input source.
p. 43
HDMI SETUP HDMI CONTROL,
SUPPORT AUDIO
Configures the HDMI settings.
p. 43
DISPLAY MENU F. DISPLAY SETUP STANDARD DIMMER,
AUTO DIMMER
Configures the front panel display settings.
p. 44
OSD SETUP OSD SHIFT, OSD BACK
COLOR
Configures the OSD settings.
p. 44
LANGUAGE
SETUP
ENGLISH, DEUTSCH,
FRANÇAIS, ESPAÑOL,
ITALIANO,
NEDERLANDS,
РУССКИЙ, SVENSKA
Changes the language used in the OSD.
p. 44
UNIT SETUP METERS, FEET Changes the display unit of measurement. p. 44