Filter
Top Products
Connections
Connecting aTV
AUBmO
IMPORTANT!
- You only need to make one video
connection from the following options,
depending on the capabilities of yourTVo
- Connect the DVD receiver directly to the
TV.
Note:
- To hear the TV channels through this DVD receiver,
use the audio cables (white/red - not supplied) to
connect TV IN jacks to the corresponding AUDIO
OUT jacks on the TV
• S-(separate)video connections achieve a clearer
picture than composite video connections. Use an
S-video cable (not supplied) to connect the DVD
receiver's SVIDEO output to athe S-video input
jack (orY/C or S-VHS jack) on the TV.
l_. ,"_ ,'_, I_ ,'Trll
• Use a composite video cable (yellow -supplied) to
connect the DVD receiver's VIDEO output to the
video input jack (or A!V In/Video In/Composite/
Baseband jack) on the TV.
13