Filter
Top Products
Connections
A
U Connect the speaker cable with the white line to
the + connector on the front/center/surround
speaker and with the black band to the
- connectol:
Lever
-- +
!lack__ _ Wllite
ice
Dane
Press the lever down.
Lhen insert the cable
into the hole and
release the leve_
A
q[_ Connect the speaker cable with the white line to
the + connector of each terminal on the
subwoofer and with the black band to the
- connectol:
Lever
O Connect the subwoofer to the DVD receiver using
the system control cable from the subwoofer to
the TO NX-SW300 terminal at the rear of the
DVD receiver.
Notes:
- Ensure that the speaker cables are correctly
connected, Improper connections may damage the
system due to a short-circuit.
- When connecting the speakers, _x the speaker
cables in place sothat cables do nat leasen. If your
foot or hand accidentally gets caught on a lease
speaker cable, the speaker may fall.
- To prevent unwanted noise, do not place the
subwoofer too close to the DVD receiver,AC power
adaptor, TV or other sources of radiation.
Lift up the lever, then
insert the cab[e into
the hole and replace
the lever.
12